Balaenoptera Musculus. Upgrades?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • masonis1
    If you cant control it 👍👍
    • Aug 2010
    • 1173

    #31
    Youtube.com/user/masonis1
    When speed isnt the option, change your ways

    Comment

    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557

      #32
      Found it finally..............??? Looks fast! Didnt you build it to race a guy??? Did you win??
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

      Comment

      • masonis1
        If you cant control it 👍👍
        • Aug 2010
        • 1173

        #33
        I built it for me an to beat my cousins blast, well now we has the same motor but different prop and I seriously doubt it can even go straight at half throttle with this.
        When speed isnt the option, change your ways

        Comment

        • Make-a-Wake
          FE Rules!
          • Nov 2009
          • 5557

          #34
          Did you race him?
          NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

          Comment

          • Make-a-Wake
            FE Rules!
            • Nov 2009
            • 5557

            #35
            I'd put a couple 4 oz sinkers in the bottom, about 4-5" from the rear...............wink, wink.
            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

            Comment

            • masonis1
              If you cant control it 👍👍
              • Aug 2010
              • 1173

              #36
              I haven't raced him since i use his esc and he uses my battery's so we borrow. And will the added weight do what?
              When speed isnt the option, change your ways

              Comment

              • Make-a-Wake
                FE Rules!
                • Nov 2009
                • 5557

                #37
                The added weight will keep it down on the water better, you mentioned in the vid how it may need more weight...........or your buddy did. I use weights in Villains and NQD's cuz they are so light to start with................give it a try!!
                NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                Comment

                • srislash
                  Not there yet
                  • Mar 2011
                  • 7673

                  #38
                  Originally posted by Nutbar

                  3. What about keeping it twin motor with no rudder (or possibly with a rudder), just upgrading to brushless, ESC, water cooled, and 2.4ghz? Would twin brushless still work well?
                  Yes you can do this with two brushless motors/ESC's. Or you can now.
                  I have just the gizmo

                  Comment

                  • masonis1
                    If you cant control it 👍👍
                    • Aug 2010
                    • 1173

                    #39
                    I'll hve to try some weight. I also need a better way to mount the battery!
                    When speed isnt the option, change your ways

                    Comment

                    • Nutbar
                      Member
                      • Aug 2012
                      • 42

                      #40
                      Nice conversions, Mason, and Make a Wake! Well, what I'm planning on doing is getting TWO Musculi, and keeping one mostly stock, except using a bigger, faster battery, but modifying the second one to twin brushless, water-cooled, lipo, 2.4ghz, and maybe a rudder.

                      Btw, Make a Wake, is this the video u were thinking of? http://www.youtube.com/watch?v=eH-a09cpsfw It looks like he did what u suggested, added a brushed ESC, servo, and rudder. That's pretty much what I want to do, except twin brushless, lipo, 2.4ghz, and water-cooled.

                      1. So, what do you guys think is the fastest battery I can use in the stock Musculus? I already know that a 7cell Nimh works well, but could I go even higher? 8cell? 9cell? 3s lipo maybe?

                      Comment

                      • Make-a-Wake
                        FE Rules!
                        • Nov 2009
                        • 5557

                        #41
                        Thanks Nutbar............ I hit the "G" by accident at the end of your name...........you know.........Nutba....... LOL, fixed it.

                        I actually get more pleasure out of taking these boats and making them into something that they shouldnt be, sleepers. There is a guy who has a twin brushless one with a center rudder...............couldnt find it on youtube.

                        A fully charged, quality 7 cell will read around 9.8-10.0v fully charged so I dont know why a 3 cell wouldnt work since its not but a couple more volts, worst thing is you fry a $5 electronics board. Or try a 9.6v pack, you know the flat, square "AA" size for Nikko's and toy stuff..........fully charged they are around 10.8v.

                        I think twin brushless with a couple 380 motors in the 2500kv range, on one big 3s powering both, would be sweet with a center rudder...............even use the stock drivelines and props to really make it look slow to an unsuspecting fellow boater LOL...............it would only have a rudder in the center to look any different.
                        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                        Comment

                        • srislash
                          Not there yet
                          • Mar 2011
                          • 7673

                          #42
                          If you want to go the twin brushless route I have a module that will transmit rudder signal to two ESC's.It is also adjustable as to how much power goes to each motor. Here is a demo http://www.youtube.com/watch?v=CCxAs...ature=youtu.be

                          Just food for thought,we just made it.

                          Comment

                          • masonis1
                            If you cant control it 👍👍
                            • Aug 2010
                            • 1173

                            #43
                            Tht might be a good idea, I'd like to see a twin 380 sized brushless motors in this, I'd like to see what I tried succeed.
                            When speed isnt the option, change your ways

                            Comment

                            • damfurst
                              Senior Member
                              • Mar 2009
                              • 261

                              #44
                              Nutbar I was just recommended a link to this thread by Sundog. I am trying to do the same thing as you with this boat. I have tried both 2s and 3s 1800mah in the boat and here is a link to the videohttp://youtu.be/qVCHid_FXiE The motors do really heat on the 3s.

                              Comment

                              • Nutbar
                                Member
                                • Aug 2012
                                • 42

                                #45
                                Originally posted by damfurst
                                Nutbar I was just recommended a link to this thread by Sundog. I am trying to do the same thing as you with this boat. I have tried both 2s and 3s 1800mah in the boat and here is a link to the videohttp://youtu.be/qVCHid_FXiE The motors do really heat on the 3s.
                                Yeah! 3s, baby! Nice! I'm gonna try mine with 3s also. It looks faster on 3s than my 7cell Nimh! And actually, the 2s DID look slower than the 7cell, but I guess that makes sense, since it's 7.4v compared to 8.4v. I'm guessing 3s is probably the fastest battery for the stock setup.

                                Yeah, I think I'm gonna buy a 2nd Musculus and try to convert it to twin brushless, ESC, water-cooled, lipo, 2.4ghz, and a dual-pickup rudder. Maybe even some trim tabs/turn fins! Lol! Super Musculus to the rescue!

                                Comment

                                Working...