Tweet
Looking for my next build, I'm thinking of a MHZ lady dragon has anyone built one? Or any ideas for a good mono around 40inc.
-
-
My avatar is dragon lady.
The only problem is that the hatch is small and there is no room to fit the electrics easy.
Also a nice almost same bottom hull is the mmp rapid. -
Thanks are their any dealers in the states that have that mmp rapidComment
-
I bought my Rapid from Germany, wasnt to bad $$-wise.
Pics and vid:
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
What are your overall thoughts on that rapid? Good quality hull, handling etc and what hardware did you use?
Would you recommend it?
Thanks jeffComment
-
Here's the straight story on it.
Built like a tank
Very high quality
Sexiest hull ever
TOO NARROW.......torque steers way too much for me.
I ran a 1717 with an x445, not a huge prop.........just a narrow hull and I even ran a BIG center mouned rudder.
Did i mention, narrow?
I guess these were made for 4074's, 3674's with x440-x442's to have lower top speeds.NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Thanks for the info I appreciate your honesty I would rather go with a wider better handling hull than just sexy. Looking for something in the upper 30 to 40 in any suggestions DF hull?Comment
-
I like the DF 35 Pirate.
I think it can go fast with not much effort.Comment
-
Upper 30-40 mph or inches? I would recommend the DF35, Pirate 35, or the DF41.
For the two smaller ones, a 4082 or 4092 on 6s2p would be sweet.
The DF41 would like a Neu 1530, Leopard 5692 or 5698 on 6-8s..................
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Make a wake
Do you think pirate will handle more on chopi water?Comment
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Looks like the DF 41 is the way to go for me.Comment
-
And I'm looking to go 60mph+Comment
-
Look what came out just in time for your build!!!!!!!!!!!!!
Run it on the Delta setup at 1280kv on 6-8s.............65+ mph!!
http://www.hobbyking.com/hobbyking/s...ess_Motor.htmlNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Nice find!
Btw what boat did you guys bring to the shootout last year?Comment
Comment