Tweet
Im new at the FE stuff coming from gas, got one of the OSE PURSUIT packages with the 2200kv and the 180 amp esc with cap Banks, going to run a dynogy 4s 5000mah 65c with 120c burst lipo, want some prop help please, wanting something that will hold the corners good and dont mind if i scrub a couple of miles off the top...In the p-mono class locally a lot of the fe monos are superfast but never finish 6 laps, seems the guys a little slower with boats that are more controllable finish,not so much looking for long run times but need enough to mill and make 6 hot laps.... thanks
-
-
lotsa guys like the m445 or the x442 on this boat.possibly the x440/3 would be ok I have heard too,most common is the m445 though and its not an amp hog lol -
I have tried all three of those props and I like the M445 best though I don't race so I can't tell about race run time but boat speed should be in 50's. I get about 5 mins on 2x 4s 3300 30c (4s 6600 total). Motor and esc around 110F or less but batts around 130F.Comment
Comment