30" Hull Setup configuration....

[Air-Wolf]

Hi All;
I have a 30 Inch Fibreglass Hull Deep V that is fairly durable. I would like this to go fast fast fast but using the hardware that I list. Can someone give me some advice on prop size, the equipment that I am using and things that I should think of....

30 Inch Deep V Fibreglass Hull
6S 5000mah LIPO Batteries
Castle Creations Hydra 120 Speed Controller
Castle Creations BEC
Feigao 540 12XL Motor
Speedmaster Mono Rudder System .150


What Torque do I need for a Servo?

What Prop Should I use?

Anything that I should be concerned of?

What amps would this work out to?


Thanks in advance!


Dwayne

[Rex R]

a standard servo should nicely. hmmm 40mm

[ReddyWatts]

What Prop Should I use? X640

What amps would this work out to? 80 amps / 27000 rpm

Anything that I should be concerned of? Be sure and add floatation to the hatch and hull.

[Air-Wolf]

Thanks!

a standard servo should nicely. hmmm 40mm

Thanks Rex!


Dwayne

[Air-Wolf]

Thanks for the Help!!!

Fantastic...Right where I want it since the batteries should be able to provide 100 amps. Can I ask how you read the prop sizes...X640 is a 40 mm prop?


Thanks

Dwayne

What Prop Should I use? X640

What amps would this work out to? 80 amps / 27000 rpm

Anything that I should be concerned of? Be sure and add floatation to the hatch and hull.