zonda tip and help :)

[Stiantrd]

hi i got a new zonda and do need some help the stock motors and esc, i asked hor racing and he said i can use my 2x180 esc and 5s lipo on this boat, it feels so big whit 5s on the motors, they are 2075KV 3674. i have tested and the boat is fast but motors is gething pretty hot, but are thinking about taking out my leopard 4074 2200 kv in my carbon genesis and use them in the zonda. have somone some good idees for me on this :)?
thax :)

[iamandrew]

is there enough room to easily mount the 4074s into the hull?

[Stiantrd]

i do not know yet but inn the genesis they fitt and that is a smaler boat

[Stiantrd]

by the way what timing do sombody recomend on 3674 motors i testet 15 on timing .

[sampit]

4074 will fit just no problem ,6s lipos placement might be the problem I stuck with a 4s2p setup in mine

[Mecka1990]

hi, someone know the exactly motors name, type and everything from the stock zonda from horracing? i writed 5 times to them but they dont answer, dont want to brun eveythign up with 5s 50/100c and swordfisch 200amps plus esc in double.

a link on the page where they been made and ever detail about the motors will be very nice!

thank you

[Stiantrd]

Hi thanx for all anwears :) the only thing i know about the original motor is 3674 /2075 kv he told me to use 5s and 180 amp esc on it.do sombody know where it is good to place the lipos inn the boat i tryed 5s 5000mah back of the motor but felt that it was to heavy in front , so i was thinking about setting 2 5s inn the front of the servo and cut out space on the carbon plate. What do you all think about that :)? Have sombody some good idees :)?

[Mecka1990]

Hi thanx for all anwears :) the only thing i know about the original motor is 3674 /2075 kv he told me to use 5s and 180 amp esc on it.do sombody know where it is good to place the lipos inn the boat i tryed 5s 5000mah back of the motor but felt that it was to heavy in front , so i was thinking about setting 2 5s inn the front of the servo and cut out space on the carbon plate. What do you all think about that :)? Have sombody some good idees :)?

you are to heavy infront? mine is to heavy behind hahaha, dont cut before you dont test it, you got enough room to place them before you cut anything on the holder, just pull them around the servo and look how it drives, if the nose is out of the whater @ 30-50 mph its to much behind.

[sampit]

Stick with a 4s2p setup you can fit 2 4s packs on the plate supplied
6s and I think you will have to move the motors back And reposition the packs in the sponsons

[Mecka1990]

if i get the money for bigger motors and more speed i must move the motors, no other choice :-(

[Stiantrd]

Lol nice one :) well when i have the lipoes in the front i have to charge them inn the boat and i do not like it like that so was wondering do someone have 2 5 s inn the midle of the boat or what have you done :)?