Help with how water is ran on the t-180 esc

[itspfo]

cAN SOMEONE EXPLAIN HOW THE WATER IS RAN ON THE T-180 ESC IN WHAT AND OUT WHAT

[shannon87]

water can be ran on either of the inlets doesnt matter normally one goes in and a tube connects two at the back and then it exits the side the water goes in but yeah there is no right or wrong way you run the water in or out whatever fits in your boat

[b20btec]

Here's a pic of one on my boat.

[Fluid]

I'll add that cooling water is usually (not always) run through the ESC first, then the motor then out of the hull. This way the ESC (the most sensitive part) gets the coolest water. Here is one way to do it, although I prefer to run all water through the T-180 first.

motley4.jpg



.

[shannon87]

yeah those pics explain it much better than i could writing it p.s nices boats b20btec and fluid i also run all my water through the t-180 on both my boats its runs much cooler than looping it making the water pass through twice