Just brought this thoughts on what mods ive brought

[shannon87]

http://www.nitrorcx.com/99b-10022-snap-720-ep-kit.html off a friend of a friend for $260 all up it comes with two leopard 3674 2650 kv motors and coolers id say he just ran it on 3s.

But thats ok as i have 40c 3s batteries its also custom painted i have already ordered a T-180 esc and other goodies.

I was going to run the batteries 3s2p in parallel so i can balance the boat properly instead of it being heavy on one side.


It also comes with a metal prop ive sent a message to find out exactly what prop it is.

[shannon87]

the prop is an octura x438 and here are a few pics new boat 2.jpgnew boat.jpg

[driftah]

sweet looking boat for sure,If it were me I would be maybe using a castle 1515 2200kv motor with your 180 amp esc on a m445 prop and if room for batteries id use 4s2p as this is a roughly 28inch boat.should be a rocket.If you are newish to the boating scene maybe try using a proboat 1800kv motor on 4s1p with a slightly smaller prop like maybe a x642.3s in this boat is ok but unless you go 3s2p you will have kinda short run times imo.

[Make-a-Wake]

An x642 is actually quite a bit more prop than the m445...............total pitch for an x642 is the same as an x448.

Shannon, i really dislike that kv zone personally, but 3s sounds best. Those 4 pole Leopards will make that hull fly...............I'd throw an x440 on it first and see what she does.

[shannon87]

Hi driftah thankyou i may change the motor eventually so i can run 4s etc and yes it will be 3s2p in parallell around 5000 mah with packs i have.

Thanks make a wake yeah i dont like that kv rating either thats why i definately running it on 3s but coming with 2 leopards was an awesome deal and having 3s packs doing nothing i was like yeah perfect for this boat.

And yeah i have a leopard 4074 in my apparation and the thing pops out of the water lol awesome motors for the money waiting for some more money to get it a good prop and i will give the x440 a shot when i get the prop for the apparition. Thanks for all your help guys

[turbonutt]

do these these have a standard flex shaft or do they come with metric? Looks like it could be a fun boat!

[shannon87]

im not too sure turbonutt i think its 3/16 or could be 4mm ill have to check when i pick the boat up on sunday

[Brushless55]

An x642 is actually quite a bit more prop than the m445...............total pitch for an x642 is the same as an x448.
Shannon, i really dislike that kv zone personally, but 3s sounds best. Those 4 pole Leopards will make that hull fly...............I'd throw an x440 on it first and see what she does.

Dang, I love the info on these forums!
sounds like the reason why I can't keep my OM29 with that prop on UL-1 power from blowing over..
Looks like I'll try a M445 next

[shannon87]

yeah definately its really invaluable ive learned so much from all the wonderful people here on OSE thanks for everything will also have to post video when she is ready for the maiden