Pb 1500 vs aq 1800 ?

[G-UNIT]

OK so the pb 1500kv motor on 6s is the same rpm as the aq 1800kv on 5s so what is your take for the best motor on the impulse 31?.
The new impulse motor is a 1800kv that states it can handle 6s
both motors are at 3300 rpm 1500 on 6s 1800 on 5s.
these figures are from the voltage chart posted on this site, is their a little leaway on these #?

[tlandauer]

I didn't know 6s= 2.2 volts. ( sorry, hope you don't mind, no ill intention)

[Heaving Earth]

lets see
1500 x 22.2 =33,300 rpm
1800 x 18.5 = 33,300 rpm
hmmm i guess the proboat motor will have more torque to swing a bigger prop. just my guess

[G-UNIT]

tlandauer:
Where did you see me type 6s=2.2 volts ?

[Fluid]

both motors are at 3300 rpm 1500 on 6s 1800 on 5s.

....

[G-UNIT]

Which motor would be more suited to run a m445 m545 m645 ?
I feel as heaving earth said that the 1500 kv would handle the larger props.
also run cooler on 6s then the 1800 kv.
any thoughts ?

[Fluid]

I would expect the 1500 Kv motor to do better, but don't assume that an m645 will automatically be okay. Start with the m445 and check temps after one minute, then two minutes.



.

[G-UNIT]

Thanks Fluid thats what I'm looking for, I will also be running a t180a esc.