help finding a small rigger

[crudeau]

I'm trying to figure out what little rigger to get. I see hobbyking has one for $20 but there is no hardware with it or sold for it. But that's right about what I'm looking for. I want just a dirt cheap little rigger that runs like 3s max. Does about 45-50mph and does it happily lol. I do want to build it. Any ideas? I'm thinking of using china electris from hobbyking or hobbypartz in it to help keep it cheap. I just can't seem to find the cheap hull kit.

I listed my aeromaring scorpion hull in the WTS section to see if any wants to trade but I'm thinking that's a dead end. But maybe I can use the rudder off that.

I have a 3s 3300mah 40c pack already to go in this rigger.

[Serpents811]

zippkitz.com

[martin]

Yep Zippkits Mini Sprint, may be more than you want to spend though but you will have one of the finest handling mini hydros that will turn on a dime flat out.

[Basstronics]

I am building the HK rigger. The kit isnt the best, wood was warped. All cheap 3 ply (with a large core). You wont find a strut to fit the predrilled holes. I used the $16 rigger strut from Kintec. I boght 3 struts to find the best one... HK does sell the rudder for it though and motor. ESC would be best to be smaller 60A Hobbywing or Turnigy.

Not sure if a 3S 3300 will fit. A 2200 does...

[crudeau]

The zip kit does seem to be tge cheapest out there since it comes with all the hardware. Everything else I see is just tge hull

[785boats]

There is this one, if you want cheap. Free shipping too. Looks the same as the HK & R2 Hobbies kit but it is ARTR.
I don't have one myself but I have bought the Arowana II from them & it was a pretty good package.

http://www.tobsd.com/ViewDetails.aspx?ProductID=65

[crudeau]

I like them both but I think the zip kit is tge winner. Just need someone to buy my other hull and I am all over it

[eric_laermans]

I recently tried www.keepthingssimple.eu and got my HW from http://www.modellbau-dortmund.de/ (1.5mm Wiredrive) and runs perfectly fine.