looking for a fast single motor setup for an apparition cat

[crazyprophead]

hi everyone im running the apparition on a 5000 6s 2p with a 120A esc

ive tried a turnigy 3648 1450kv 1600W outrunner with a CL-08A 42mm prop and was very happy with the speed, would have been close to a hundred kph

now the only problem was i couldn't cool the motor, being an outrunner,

so im trying to match this setup with an inrunner or slightly beat it, i already have 36mm water jackets so i was thinking

an ARC3655-2 1400kv

or a leopard 3674 1400kv

or anything else that is recomended,
what do you guys think?

cheers.

[1945dave]

You can't go wrong with the Leopard 3674 in my opinion.

Dave

[crazyprophead]

Cool thanks

cheers.

[LarrysDrifter]

Arc 36-45-1 1680kv, 180 amp esc, X442 prop. This is a 64mph set up that runs cool. Proven by GPS in an Apparation.

[crazyprophead]

Arc 36-45-1 1680kv, 180 amp esc, X442 prop. This is a 64mph set up that runs cool. Proven by GPS in an Apparation.

awesome,
and was that running on 6s, and how hot did it run?

[LarrysDrifter]

6s1p. Been a while, but temps were between 100- 120 on the motor/esc. The smaller prop is the ticket. Dont go bigger than the X442.

[LarrysDrifter]

That was supposed to be 36-75-1.

[crazyprophead]

ah cool, those temps are pretty good, yeah with that 36-75-1 trying to rev to over 37000rpm, more than 42 prop would be too much,
yeah so definetaly the leo 3674-1400kv or an ARC 36-75-1

http://www.youtube.com/watch?v=KteZYspriyE

hobbyking did a video with a sk3 3659-1900kv inrunner on 6s with 63mph gps speed, they were running a detounged 42mm prop, that setup cant be efficient as the motor is trying to rev over 42000 rpm and being bogged down alot lower than that

cheers.