Fecalc and an SV27 motor?

[flyboy320]

Trying to use fecalc with my SV27 motor. My speed controller is in the text file (CC Barracuda 80), but not my motor, or lipos (4S). Anyone have the data for these two items (lipos and motor) so I can add them to the txt file?

Thanks....

[ReddyWatts]

Fe Calc gives high amp readings on 4 and 6 pole motors. It was designed for 2 pole. You can trick it by using the hydro / performance hull setting for a mono or cat hull to get a close reading for a 4 pole motor.

[flyboy320]

So what motor should I select to best fit the SV27?

HV 4.5
Aveox 36/30/2
Fiego 540-12S
Feigao 540-8S
Feigao 540-7L
Feigao 540-12L
Feigao 540-7XL
Feigao 540-8XL
Feigao 540-9XL
Feigao 540-10XL
Feigao 540-11XL
Feigao 540-12XL
Feigao 540-14XL
Fine Cordite SS1
Fine Cordite 775
Graupner 820BB
Graupner 700BB 8.4V
Graupner 700BB 9.6V
Graupner 700 BB 9.6V
Graupner 600 BB 7.2V
Graupner 600 BB 8.4V
Great Planes S-600
Hacker B50-6L
Hacker B50-6XL
Hacker B50-7L
Hacker B50-7XL
Hacker B50-8L
Hacker B50-8XL
Hacker B50-9L
Hacker B50-9XL
Hacker B50-10XL
Kyosho Magnetic Mayhem
Kontronic Funn600-11
Kontronik Fun600-18
Kontronik Fun600-32
Kontronik BL480/33
Lehner Basic 4200
Lehner Basic 5300
Lehner 1920/5
Lehner 1920/6
Lehner 1930/6
Lehner 1930/7
Lehner 1940/6
Lehner 1940/7
Lehner 1940/8
Lehner 2240/9
Lehner 2240/12
KB45 8XL
KB45 9xl
KB45 10xl
KB45 11XL
Lehner 2280/11
NEU 1515 1D
NEU 1515 1.5D
NEU 1521 1D
NEU 1521 1Y
NEU 1521 1.5Y
NEU 1521 2Y
NEU 1527 1D
NEU 1527 1Y
NEU 1527 1.5Y
bigmotor
Mabuchi 550 RS
Mabuchi RS550SH- 4425
Mabuchi RS750F
Mega L5
Mega Midi 7 1900
Mega Mini 7 2250
Mega S4
Mega S5
Mega S7
Plet HP 290/20/04
Plet HP 290/20/05
Plet HP 290/20/06
Plet HP 290/20/07
Plet HP 290/30/06
Plet HP 290/30/07
Plet HP 290/30/05 Tor
Plet HP 290/30/06 Tor
Plet HP 290/30/07 Tor
Trinity Opal
Trinity Quartz
Trinity Jade
Trinity Onyx
Trinity Platinum
Trinity P38
Generic 12T Car Motor
Generic 17T Car Motor
Generic 21T Car Motor
Generic 27T Car Motor
Typhoon 2w-20

[ace028]

I don't have all those motor selections in my program?!

[flyboy320]

I don't have all those motor selections in my program?!

Here you go. I take no credit for this, just found it from a search...

[ace028]

Thanks, I guess I didn't read the destructions all the way, I added that file to the installation folder and now I have all the choices.