Timing and frequency for Leo 5692 720kv with FC 16S 300A esc?

[tagasagwan]

Hi guys,

Actually I'm posting for a friend who's asking for advice on what frequency and timing he should use with his E-laser 45 mono project.

here's what he has,

Motor: Leopard 5692 720kv 4poles
ESC: Fighter Cat 16S 300A.
Lipos: 10S2P lipo packs


Any response will be highly appreciated. Thank You!

Stephen

[m4a1usr]

A 5692 730kv motor is a 3Y. Typically higher then delta settings should be used. But I dont own a FC speedo yet so I dont know honestly. If it was a Castle I would opt for something over 10 degrees.

John

[tagasagwan]

Thanks John! I Appreciate your input.

[carlcisneros]

start the timing at 10 and use 8KHz freq.

[Espresso]

Got any pics or build thread on your friend's project?

[tagasagwan]

@Espresso, Sorry I don't have photos of the build. He's a non ose member so no build thread either. I'll try to ask for some photos from him.

@carlcisneros, Thanks mate! I'll tell him to try your recommendations. It seems like a safe place to start.