Need some help

[shawnboat]

First time building a boat, Im stuck

I have two wires coming out of the ESC, not sure what they are for , and two wires coming out the battery. I tryed hooking it up to my leopard 5692 and it continues to beep every second or so.

[shawnboat]

Anyone?

[Flying Scotsman]

It is very simple...read your ESC instructions.

Douggie

[shawnboat]

Ya.....I did that thanks "Douggie"

[LiPo Power]

On your ESC, one goes to your receiver and another is for programming.
When it comes to your lipo we need specs of it but from what I can see it is made out of 2 separate batterys to make one.
They are balancing wires. They need to be pluged in to your charger when balance charging...
Cheers
Robert

[shawnboat]

On your ESC, one goes to your receiver and another is for programming.
When it comes to your lipo we need specs of it but from what I can see it is made out of 2 separate batterys to make one.
They are balancing wires. They need to be pluged in to your charger when balance charging...
Cheers
Robert

perfect, thanks

[LiPo Power]

battery specs please?

[shawnboat]

battery specs please?

Li-po
25C series
5000
8 cell 29.6V

[LiPo Power]

Right, so you have 1 8S battery made out of 2 x 4S, shrink wrap together and that is why there is 2 balancing wires on your lipo. Some people are doing that with lipos...
Hobbyking.com has adapters to make it as one unless you allready have one....
Hope this help...

Li-po
25C series
5000
8 cell 29.6V

[shawnboat]

Right, so you have 1 8S battery made out of 2 x 4S, shrink wrap together and that is why there is 2 balancing wires on your lipo. Some people are doing that with lipos...
Hobbyking.com has adapters to make it as one unless you allready have one....
Hope this help...

nope I dont, This helps very much, thanks