I have a twin genesis that is currently running a pair of Chinese 3660 2700kv on 4S and am looking to upgrade the motors before they go bad. I was thinking a pair of leopard 3674 2200kv or 3674 2700kv for this setup? I am running 2 T180's with extra caps also. I want to run 4s..... Any ideas????
Twin Genesis motors?? 4074 2200kv what do you think?
Collapse
X
-
Twin Genesis motors?? 4074 2200kv what do you think?
Last edited by jasoncyclone; 04-29-2012, 12:18 AM.Miss Geico CC1515 2200kv T180 2S2S- Twin Genesis with 2 2700kv 2 T180's 4S2P- Stiletto with 2030kv T120 4S1P-DF33 4082 1600kv T180 6S2P- and lots of gassers!Tags: None -
Is there actually enough room in the hulls to have the 4074 with cooling jackets and accessible water cooling slots etc?
I think someone had one so it is possible, but yeah i remember something about it being really hard to remove the motors!
i think if youve got two 36 size motors in the hull it should be fine -
If you do use those motors Don't forget to drop the timing down from the 15 degree default setting to 3 degrees or so.
Both those motors are D wind motors & won't like high timing. Although I think the 2700kv motor would really be the 2650 kv version.
Personally I'd go for the 2200kv version.See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
Ivw been thinking of the 2200KV version. I havee a Geico running 4S on 2200KV and like it....Thanks for reminding me about the timing! I will make sure to lower the timing.Miss Geico CC1515 2200kv T180 2S2S- Twin Genesis with 2 2700kv 2 T180's 4S2P- Stiletto with 2030kv T120 4S1P-DF33 4082 1600kv T180 6S2P- and lots of gassers!Comment
Comment