Program card wiring: need help!!!

[JIM MARCUM]

Couldn't find the hook up instructions on my HobbyWing program card & probably killed it. I hooked the SK 180 ESC to the left slot & a jumper loop in the right slot, then a 4S LIOP to the ESC. Nothing smoked, but the card didn't work. Might have a sequence to set it up but can't remember. HELP PLEASE. JIM

[h2o 1]

ESC wire in the right slot,program only using 2s battery connected to the esc.

[ray schrauwen]

Since the T180 has BEC, just plug it into the the program card and then plug in main batteries, if it powers up and works, you should be good. It will not hurt it at least.

[JIM MARCUM]

That worked! Thanks Mark. Anyone out there have the instruction manual? THX, JIM

[h2o 1]

I have one Jim,I can copy it and send it to you if you like,and ur welcome!!

[JIM MARCUM]

I ordered another card from OSE before I tried your method, so it should come with instructions. But it won't be here for a few days, so if you could post pictures of the wiring setups on this thread I'd appreciate it. Or you can email it to me as an attachment. Here's my email: [email protected]
THX, JIM

[h2o 1]

I emailed you pics of the complete instructions that came with the program card.Hope thats what ur looking for!