Indentification Help

[Camps23]

Pool noodles sliced up and shuved into the front of the hull ?
How do you attach the foam to the hatch ?
How does the Syncron hatch lock in ? Are most hulls justed taped shut ?
Sorry for the newb questions...just this a great place to learn
Thanks.....Chief

[BHChieftain]

Pool noodles sliced up and shuved into the front of the hull ?
How do you attach the foam to the hatch ?
How does the Syncron hatch lock in ? Are most hulls justed taped shut ?
Sorry for the newb questions...just this a great place to learn
Thanks.....Chief

Just cut the noodle into a wedge shape and stuff it into the nose. You could velcro it into place as well. For the hatch you can glue a carved piece into the "canopy" dome.

No hatch locks-- use hockey tape (sold on ose) to tape it into place and this waterproofs it as well. I've never had a hatch come off with tape on this hull.

You will like this boat. If you decide later you would prefer a cat, this hull should sell very quickly at the ose swap shop...

Chief

[Camps23]

Thanks for the info chief.
I found out the setup comes with a
Octura M445 prop. How will this perform
with the current setup ?
Thanks

[Camps23]

I dont like the fact the esc doesnt have lipo cutoff.
What would be a better esc for this setup with lipo cutoff. Something that if I decided to upgrade the motor it could handle it.
Motor is AquaCraft Brushless B36 Motor (1800kv) with 5mm Motor Shaft.