cmdi Props

[andym]

Steve will you be stocking the new milled cmdi props, they look good and no balancing required.

[Steven Vaccaro]

Right now they have a special were they are selling direct for a discounted price. After that I will have them.

[andym]

Great news, thanks Steve

[ReddyWatts]

Will we be able to special order props not currently in production, since this process does not require making a new cast. I would like to try a Y540, 2 bladed prop.

[Steven Vaccaro]

Although I can't speak for them, probably not for a while. CNC setup still requires time. Seems they are working on the popular sizes first.

[Bill-SOCAL]

I just got a 4569 (2.72 inches pitch) and a 4773 (2.87 inches pitch) from CMDi. I will have to be careful when driving with these. They may qualify as deadly weapons. Now I have to get to the lake and runs these nasty looking props!!!

[Darin Jordan]

I just got a 4569 (3.4 inches pitch) and a 4773 (2.90 inches pitch) from CMDi. I will have to be careful when driving with these. They may qualify as deadly weapons. Now I have to get to the lake and runs these nasty looking props!!!

I'm hoping mine will be at my doorstep when I get home tonight... Have them coming in both right and left rotation... I also have the initial 51mm offering coming in R and L as well... Should bring 1/10th scale racing to a new level of tuning...

Bill... isn't the 4569 a 2.72 pitch?? 69mm / 25.4 = 2.716...

[Bill-SOCAL]

From Andy and John Brown's posts on RRR about the props:

This prop is 50mm in diameter and the average pitch is 3.25" The trailing edge is 4.0"

Added another prop today. The 4569/3 Dia.=45mm Pitch=69mm T.E. is at 3.4"

I wrote down the TE pitch and not the average. Oops!!

[z400]

Where are you guys buying these props and or there products?


e-mailing them direct?

[Bill-SOCAL]

Yes. For now they are taking orders directly at:

[email protected]

So until they get spooled up and start gettting Steven stock, this is the only way to get the props.

[properchopper]

splendiferous !

These props are almost too beautiful to endanger on a boat. I'm putting mine on the nightable so I can just stare at them !

[z400]

Yes. For now they are taking orders directly at:

[email protected]

So until they get spooled up and start gettting Steven stock, this is the only way to get the props.

yeah i found their e-mail on the site.



i may possibly place and order for a couple props.

might wait untill steve gets some also though.


what are there prices like anyways?
anyone ever ran any of there pipes?

[hkusp45]

tony what size did you get?

[hkusp45]

Are you guys running this weekend?

[properchopper]

re :

Fred, I got the 4569 & 4773; both to try on the DF. Legg's closed. I'll come out your way, or Prado if we can find a rescue boat. Any suggestions ? I need some water !!