Drive Hardware setup

[OJ racer]

For the Solinger Hydro hardware, do you want to have the prop totally centered or offset a bit? Also, is it okay to run water cooling through one pipe that goes through the motor and ESC, or should you split it so the water is cool?

[andym]

I run mine centered but I know some of the guys here off set them, as far as water cooling, run through esc first and then the motor and all will be OK

[SJFE]

From what I have read the off set is 3/16th to the right of the centerline.

[OJ racer]

Thanks for the advice. I measured and the holes on the solinger hardware are setup for 3/16 inch offset.