5682 1700kv, CC240 6s2p and X646/3 in a 45" hull?

[znus]

Did I just break the new record in "most digits in a topic"?

So, got all the hardware but not the hull, yet. Thinking about a Arrow Shark Octane 45" hull. Do you think the CC 240 will handle the 5682 1700 kv along with the Octura 646/3 without going up in smoke? It will run on 6s2p with a total of 10,000 mAh. I get a little nervous just by looking at that motor and thinking of how much current it probably wants to eat. The setup should be able to do just over 60 mph, which will be plenty. The motor can probably take a little bit more prop but that will also increase the current draw....and I'm not a big fan of that

So, any input on this? Will the CC 240 Hydra explode? Is the hull too big or just right?

[kievyu]

used this motor on 32" deep vee hull .... 6s1p 5000mah 30c .... octura X445 .... speed around 100kph

seaking 5682 X445.jpg

[znus]

Wow, haha. I can't fit this big lump in my little 31" Arowana. I have trouble keeping it on the surface with a simple 4082.