help with builds CF river cat, mhz 43" nomad Cat, king of shaves cat

[sigelitest]

These are my winter builds CF river cat, mhz 43" nomad Cat, king of shaves cat

These are the motors I have
leopard 5692 1340kv
scorpion hk 4035 800kv
scorpion hk 4020 1390kv

I am thinking of putting the 5692 0n the nomad with 5s2p
The scorpion 4035 on the king of shaves on 10s
And the 4020 on the carbon fiber river cat with 5s

What do you guys think
Or should I buy another 4020 and do the K of S twins
And do the river cat with the 4035

[Fluid]

That is not the best choice in motors for your projects. The HK4035 will be dead-slow with anything less than 8S. It is not suitable for the 32" HOTR cat due to the prop size required. A better choice for the HOTR cat would be an 1800 Kv AQ or PB motor on 4S to 5S. The HK4020 would also work on 5S to 6S.

The Nomad will be underpowered with just 5S. A better idea would be the HK4035 on 10S if decent, reliable performance is needed.


.

[sigelitest]

jay i don,t understand what motor should i put with which hull and what s bat setup for each also if i cant use a motor with any,, let me know i will just sell it and get the correct one I plan on seting these up for sport and I would like to get around 60 to 65 MPH.. Do u think I would get more power with the 4035 on 10s than the leo 5692 on 5s 2 packs?

thanks again for the help

[sigelitest]

I did plan on using 10s for the 4035 since it is only 800kv
the 5692 is an inrunner and about twice the size of the 4035
the 5692 is 1340kv i am not sure which one has more HP

[sigelitest]

i am feeling alot of this

[Chrisg81983]

Looks like u r all alone here well at least u don't need info about the nomad anymore call me later