Maker of These 39x96 Motors?

[Kershaw Designs]

Hello fellows,

This is Dan from Kershaw Designs. I've just noticed a motor that has popped up at a few overseas suppliers. Would love to carry it for large scale RC car electric power. I have to think it would be a great motor for boats too. But for the life of me, I cannot find the manufacturer with tons of google searches. These 2 motors appear to be off the same assembly line. Anybody have any information about the maker?

39x96mm 4 pole 850KV motor with no heat sink
39x96mm 4 pole 1020KV motor with heat sink

Dan Fischer
[email protected]

[steveo]

i've seen a 3996 at hobbyking with out the fins also low kv

[steveo]

oops you found it idid not look at the link

[sundog]

Dan, that second link goes to a 54x96 motor with a 5mm shaft, not a 39x96 w/8mm. Is this the right link?

[JackBlack26]

The second motor is a 2 pole motor. The one at HK is a 4 pole.

[Kershaw Designs]

Dan, that second link goes to a 54x96 motor with a 5mm shaft, not a 39x96 w/8mm. Is this the right link?

Yeah, that's the correct link. the 54x96 is the same motor with a giant heat sink that makes the final, overall diameter 54mm.

[Kershaw Designs]

The second motor is a 2 pole motor. The one at HK is a 4 pole.

Nah. The one listed at OK Hobby is a 4 pole motor. Misprint in the specs at OK Hobby. I have a few here myself that were gotten from OK Hobby and all of them "rachet" like a 4 pole motor. They run particularly cold too.

[crrcboatz]

I have one in good running condition if someone wants one. It is a 39x96 I bought here on OSE