Cooling hose wrap?

[runzwithsizorz]

It's nothing to do with cooling, it purely cosmetic

If that's the case, use the ones from Kintec that Boaterguy pointed out. you *MAY* get extra cooling, AND bling. Fancied getting a few myself, and running them along the top of my rails to the ESC, and motor.

[drwayne]

It's nothing to do with cooling, it purely cosmetic

Agreed.
Tube wraps have nothing to do with cooling.
75% to do with anti-kinking
50% to do with bling.
makes it 125% better than plain tube.
The Kintec inline are great for nitro fuel lines... where +/- a few deg is a big deal.
Personally, Id not restrict the flow .

W

[egneg]

It doesn't go in the hull. It's used between the rudder and transom for some bling.

[785boats]

Good old HK sells a mesh guard if you buy from there.

http://http://www.hobbyking.com/hobbycity/store/__9559__Wire_Mesh_Guard_Blue_3mm_1mtr_.html

[Mattwarner]

It doesn't go in the hull. It's used between the rudder and transom for some bling.

exactly right!

[mgcrimson]

Found this from Tower Hobbies...

http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=000166707&I=LXVZR4&P=K