WHERE do I get this????

[LiPo Power]

I have OS lower unit like this one:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCP20&P=7

and need to install UL-1 motor on it.

Where do I get the adapter from please?

Thanks

Robert

[Diegoboy]

Right HERE

Don't (I repeat, Don't) use the stock OS cable with that coupler. Get some cables from either HERE or from Kris Flynn

[LiPo Power]

Thank You Diego
How long the cable has to be to work with this coupler?
I have 3 Hyperformance cables that are 4.75 but they are way shorter than stock 5 1/8 inch cable.
When inside it looks like it is so short the coupler will not have enough to grip on...
Robert

Right HERE

Don't (I repeat, Don't) use the stock OS cable with that coupler. Get some cables from either HERE or from Kris Flynn

[Diegoboy]

The issue I had with the stock cable was with slop in the coupler. It doesn't fit right so it rounds out both the coupler and cable. I got cables from Kris, and they fit perfectly.

[LiPo Power]

So Kris will cut the proper lenght also, right?
Robert

The issue I had with the stock cable was with slop in the coupler. It doesn't fit right so it rounds out both the coupler and cable. I got cables from Kris, and they fit perfectly.

[Diegoboy]

Absolutely