Bulkhead for my GENESIS

[Alfa Spirit]

I put a bulkhead in my HOTR cat hull and I want to do the same for the Genesis. there is foam into the front of the hull
If somebody did this on a Genesis I' m interested,
Thanks

[tiqueman]

I think I drew that HOTR template. I should have one for the Genesis as well. Ill check it out and see what I can find. If not, its easy to make. I took some about 1/8" thick solder off a role and shaped it around the inside of the bottom half of one side. Then traced it onto a piece of balsa, flip it and trace the other side. Cut it out a little larger and keep working at it until it fits nicely. then trace it onto a piece of carbon and cut it out. Shouldnt take you more than an hour to do. Lately Ive been making templates out of pieces of cardboard from boxes that have been shipped to me.

[tiqueman]

Yup, I have the template, but the file is one of the ones that got corrupt when my computer crashed. If you absolutely cant make your own, I can make another one, put it in cad and send it to you as a pdf. But it might be a week or two.

[tiqueman]

I did this real fast, id suggest cutting it out of cardboard first and getting a good fit, then go with whatever your making the bulkhead out of. It may need a little bit of adjusting.

[Alfa Spirit]

Thank you so much Tiqueman

[tiqueman]

You're welcome. Like I said, make it out of cardboard first. I made that really fast and its close but not perfect.