Genesis questions. Not fast enough.

[JackBlack26]

Looks like you need to move your batteries forward to get it to settle down.

Here is my old Gen in the hands on its new owner. He goes full throttle at the beginning of the video, about :40seconds in, and realizes how fast the boat is with a 2200 4074 Leopard motor on 6S. Over all the driver of the Mean Machine is much more familiar with his boat but you can see that when he opens up the Gen, it's very smooth and very fast! I rebuilt the boat and passed it off to him after a few runs of my own with it. I didnt like the fact that the boat handles as it does. It's more of a SAW boat, which I didn't want.

http://www.rcgroups.com/forums/showpost.php?p=18242123&postcount=4558

Here is a videos of one of my outing with the boat with the 2200 4074, on 4S 2P.

http://www.youtube.com/watch?v=zbKpRtnc9sA

[tiqueman]

Hit up Osprey21, hes in our club. Im pretty sure he broke 60 on a 4074 w a 6S set up. Cant remember what kv he had though and I think it was on a M445. Three of us were running Q-offshore and all of us were in the 50s, two of us, Osprey and myself, with Leopard 4074s. I was running a 442 w/ the tongue removed and tip cupped a little.

EDIT, and all of us were running Genesis hulls

[Make-a-Wake]

3.7V x 10 cells x 1500kv is 55,500 RPM!!! That seems like too much???

seems like on 10S i'd want to go down to about a 1,200KV?

He was running this only in SAW passes to see what he could get to. Its not a good setup for everyday sport/racing.

[HYDROJERRY]

I ran my Genesis today with its new setup and hit 51.8mph and was very stable,,just gotta fix my water leak,,PS it has a Leopard 4074 2200kv motor, Swordfish 200a esc, 2x5s 5000lipos paralleled on a m445 prop and every thing was just ahair warm..