hydro ,how do you run them

[Gen]

Want to know best ,FASTEST way to run hydros got a fe30 ,playing with strut angle and cog now to get best performance and wanna know when u run do u run with just prop and turn fin in the water ? Or r front sponsons best touching the water ?

[jamie]

My FE seems to run well (66MPH so far) with the strut at about 1 Degree positive angle and the standard 7/8 to 1"" depth depending on water conditions. My C.O.G is around 2 1/4" from the back of the sponson. Use a straight surface to check the angle.
I also have tried M445 M645 m648 and ABC H5 Props which are all 2 blade props so far. Your best off checking out some utube runs from Properchopper or Mark Ferreira to get a good idea on ride attitude.

[Gen]

what motor ? ,im running castle 2200 on 4s 2p runs are at about 55 mph with 7/8 depth ,ah well ill just keep playin tuneing

[jamie]

Im running a little bigger motor than that (1527) the 66mph was with the M648. Lousy runtimes thou as in OZ we not allowed to run 2P Cells.

[Gen]

Well I'm in oz too WA. u in Adelaide or Brisbane cause I thought that's were electric racing is , ,were not concerned bout batts here , just run what u got