prince flexshaft

[driftah]

i have a 25 prince and was wondering what others use for a flexshaft in it.the stinger bushing is 4mm diam.I want something reliable too.

[Boaterguy]

OSE may have a 4mm setup but i'm not sure.

[driftah]

i never saw any here,and what strut can I toss on this to use 3/16 shafts? it has to be small i think...

[Boaterguy]

You can get the speedmaster mono strut, and run a .187 cable, it may need some modification and a new stuffing tube but it'll work.

[driftah]

wonder If I should trust the wire drive or drill out the 4mm bushing to 3/16, cant find a 4mm flexshaft anywhere so far hmmm..

[Boaterguy]

http://kintecracing.com/Flex_Cables.html

Scroll down about halfway or more. you have to assemble it but it's what you need.

[driftah]

I see nothing that has 4mm prop shaft????

[Boaterguy]

I can't link to it, it's a square drive cable, there's also the prop shaft, 4mm on everything

[danielplace1962]

http://kintecracing.com/Prince_Upgrades.html

Stock,



Upgrade needs strut and .150 collet and probably a stuffing tube also to work,

[Basstronics]

What motor do you intend to run in it?

[driftah]

7xl so I need a 5mm to .62 wire coupler and I want to get another wire drive shaft and or a flex just in case something snaps.jeff wholt has the wire drive but wants more than the cable costs to ship to me so I am looking now for a spare it seems.....