Pushrod connectors

**longballlumber** · 08-11-2011, 02:00 PM

same concept

Tower Hobbies carries an expansive collection of RC cars, RC airplanes, RC boats, model trains, sot cars, and supplies for all hobbyists.

Later,
Mike

**oscarel** · 08-11-2011, 02:04 PM

Except when the bolt is up against the side of the radio box and you can't tighten it.

**longballlumber** · 08-11-2011, 02:16 PM

I figured that's what you were getting at...

These are square shaped. You might be able to drill and tap so the screw is facing you....

Tower Hobbies carries an expansive collection of RC cars, RC airplanes, RC boats, model trains, sot cars, and supplies for all hobbyists.

Better yet, cut the 4-40 rod to the correct length and solder on a clevis... MUCH better linkage if you ask me... Just my 2 pennies though.

Tower Hobbies carries an expansive collection of RC cars, RC airplanes, RC boats, model trains, sot cars, and supplies for all hobbyists.

Later,
Mike

**oscarel** · 08-11-2011, 05:12 PM

Thanks, I'll go the direct route if I can't find more of these.

Comment