how to stop spark from lipo

[jjrctech]

how to stop spark from lipo. 6s -10s would putting 1/4watt 4.7 ohm resistors or 1/2 watt 470 ohm resistor do the trick on startup??

Thanks

[kookie_guy]

I think you need a higher wattage resistor. There's a thread with a link to show what size you need and stuff. Let me see if I can find it.

[kookie_guy]

Here's the website with the calculator. According to the site, with 6s you will need 2watt resistor, anything over that is says to go with a 5watt resistor. So 1/4 and 1/2 watt are way too low.

http://scriptasylum.com/rc_speed/nospark.html