Which monohull for Feigo 540 S 7s ?

[Andris Golts]

Hi all i have a Feigo 540s 7 turn 5070 rpm/volt motor sitting on the shelf i would like to install it in a mono hull .What length and beam of hull should i be looking for? The motor i believe is rated for a 2s setup .Are there any official 2s mono class's run in IMPBA or NAMBA ? Which ready built hulls would be recomended for this type of motor? Regards Andris Golts.

[Heath M]

DF26 is a gr8 2s mono hull