T180 timming program and lipo cut off

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Slvrbowtie
    Junior Member
    • Jul 2011
    • 22
    #1

    T180 timming program and lipo cut off

    I have an apparition with the stock 3660 1697kv what should i set the timming nd lipo cutoff at on 4s? Thank you
    Tags: None
    • znus
      Broke, as usual
      • Jun 2011
      • 120
      #2
      Start with 0 timing and set Lipo cutoff at 3,2v. If your T180 cuts out when going WOT your Lipo(s) can't handle the draw.
      25" Arrowana with Etti 2970 3300kV. RCMK Flying Cat with twin HOR Outboards. 2 x SSS 4092 2140kV. Faluga 45" with Leo 56110 620 kv on 12s.

        Comment

        • Rumdog
          Fast Electric Addict!
          • Mar 2009
          • 6453
          #3
          Do not run 0 for timing. You need to find out what style wind your motor is, then we can help you out.
          3.4v per cell should work well for the cutoff.

            Comment

            Previous template Next
            Working...