Pursuit Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • iamandrew
    Senior Member
    • Jul 2010
    • 577

    #1

    Pursuit Question

    Can anyone confirm the drive size for the pursuit boat?
    Ive found 4mm in some sites, and 3/16th on others.
  • Steven Vaccaro
    Administrator
    • Apr 2007
    • 8721

    #2
    It depends on how they are built. Most should be 3/16. Do you have one?
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

    Comment

    • iamandrew
      Senior Member
      • Jul 2010
      • 577

      #3
      No I was thinking about getting one, but still cant make my mind up. Its just in a lot of the pictures it looks like 4mm setup, not 3/16 as ive got a spare 3/16 cable shaft with collet and it looks Huge compared with the 4mm that was on my genesis.
      I like the genesis, it goes great at speed, but i was set on getting somthing at least 40in Long which can handle rougher water, but im starting to think $1000 will be better spent on a gas boat :S

      Comment

      • Steven Vaccaro
        Administrator
        • Apr 2007
        • 8721

        #4
        I have them in 3/16 in yellow or white is you are interested.
        Steven Vaccaro

        Where Racing on a Budget is a Reality!

        Comment

        • iamandrew
          Senior Member
          • Jul 2010
          • 577

          #5
          How much with No Motor or ESC? just the hull with running hardware and shipping to australia?

          Comment

          • Steven Vaccaro
            Administrator
            • Apr 2007
            • 8721

            #6
            Sorry I only have them with the leopard motor and seeking esc.
            Steven Vaccaro

            Where Racing on a Budget is a Reality!

            Comment

            • Drax21
              Fast Electric Addict!
              • Jul 2011
              • 1021

              #7
              Steve, I'd be interested to know what you sell the Pursuit for just out of curiosity for now....
              Everything that has a beginning, has an End

              Comment

              • driftah
                Senior Member
                • Aug 2010
                • 760

                #8
                me too may be interested

                Comment

                • Steven Vaccaro
                  Administrator
                  • Apr 2007
                  • 8721

                  #9
                  Leopard 4074 2000kv motor and hobby wing 180 esc with extra caps. They are $400 plus shipping.
                  Attached Files
                  Steven Vaccaro

                  Where Racing on a Budget is a Reality!

                  Comment

                  • Drax21
                    Fast Electric Addict!
                    • Jul 2011
                    • 1021

                    #10
                    That's a good price, I haven't seen these on the site. The Hull is different than the DELTA Force 33"???, I've been told the Delta is stronger.
                    Everything that has a beginning, has an End

                    Comment

                    • Rumdog
                      Fast Electric Addict!
                      • Mar 2009
                      • 6453

                      #11
                      It is more similar to the Delta Force Cyberstorm. DF hulls are far from "tough".

                      Comment

                      • Drax21
                        Fast Electric Addict!
                        • Jul 2011
                        • 1021

                        #12
                        Good to know, I have a pursuit already running a Kershaw Design Gen 2.2 Motor. They say that their motors are unique but it looks similar to the Keda here on OSE. KD say at 2364kv its around 2 amps No load current, whereas on here it says for Keda 2364kv 3.2amps. Which is quite a bit more than a Leopard. Steve can you shed some light?
                        Everything that has a beginning, has an End

                        Comment

                        • Steven Vaccaro
                          Administrator
                          • Apr 2007
                          • 8721

                          #13
                          Originally posted by Drax21
                          Good to know, I have a pursuit already running a Kershaw Design Gen 2.2 Motor. They say that their motors are unique but it looks similar to the Keda here on OSE. KD say at 2364kv its around 2 amps No load current, whereas on here it says for Keda 2364kv 3.2amps. Which is quite a bit more than a Leopard. Steve can you shed some light?
                          Not sure what Dan has listed, but they are the same.
                          Steven Vaccaro

                          Where Racing on a Budget is a Reality!

                          Comment

                          • burgerchow1
                            Member
                            • Jul 2011
                            • 50

                            #14
                            Originally posted by Steven Vaccaro
                            Leopard 4074 2000kv motor and hobby wing 180 esc with extra caps. They are $400 plus shipping.
                            Steve, are these the same pursuit boats sold by hobby king?

                            By the way, just received my shipment from you today. Thanks.

                            Comment

                            • Steven Vaccaro
                              Administrator
                              • Apr 2007
                              • 8721

                              #15
                              I dont know, you would have to look at the parts and compare.
                              Steven Vaccaro

                              Where Racing on a Budget is a Reality!

                              Comment

                              Working...