deans plug

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jjrctech
    Senior Member
    • Feb 2011
    • 162

    #1

    deans plug

    Deans plug rated at only 60amp anyone try higher amp??

    I like this type of plug the best would it make a different If i use 1 full plug for the + side and another for the - ?? or would the power pick the fastest side ???

    want to use dean plugs on a 210amp setup


    I see battery on ebay deans plug from Thunder Power rated at 200amp???


    Thanks for any info
    --> 54" fountain - Bonzi boat. http://www.youtube.com/watch?v=_cxR6yDRJXw
  • mtnbiker94
    Member
    • May 2011
    • 62

    #2
    Not sure how many amps are going through mine, but I run deans on 2 3s's in series which is 6s=22.2 volts. And I've never had a problem with them, but im sure its nowhere near 210amps!

    Comment

    • iamandrew
      Senior Member
      • Jul 2010
      • 577

      #3
      I had some issues with deans plugs so went to bullet plugs instead, the main problem I had was getting the battery wires soldered onto the flat deans plug.
      with bullets its a lot easier to get more surface contact

      Comment

      • rc2266
        Senior Member
        • Apr 2011
        • 312

        #4
        Mine always melted the solder
        I'm married with children, you can't scare me!

        Comment

        Working...