Tweet
This is my first build so, I'm looking for a build sheet, dimensions, and pictures would be great. I had a Miss Vegas that I would like to transfer over some of the hardware if possible. I have a 2600 FE motor with mount and some other pieces. I was originally going to make it FE and decided on this hull instead.
-
-
I ended up with an 8XL on 4s. CG is about 1/2" from sponson trailing edge. You should be able to use all the hardware from your miss vegas with no problems. With a 2600kv motor I would stick to a 3s setup.
Build pics
http://forums.offshoreelectrics.com/...ghlight=vortex
latest video
Ryan
Comment