"P" class which motor 2200kv 4082 or 1515?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HTVboats
    Senior Member
    • Jun 2011
    • 803

    #16
    Obviously I have too little to do here on a rainy day. Thanks very much to all commenting here and do not stop. I am learning a lot about FE and enjoying the performance potential. I am retired and been involved in full size boats and cars then RC cars boats, nitro, gas and now including electric. After 40 years of various racing I am still a motorhead and trying to absorb all I can. The beauty of forums is hands on experience shared with people you may never meet and if your paths cross you have a head start to a friendship. That and as my knees are deteriorating I definately will have an edge when I start modifying my "Lark" scooter for some laps around Wallyworld.
    Mic

    Mic Halbrehder
    IMPBA 8656
    NAMBA 1414

    Comment

    • TheShaughnessy
      Fast Electric Addict!
      • Mar 2011
      • 1431

      #17
      I was under the impression you could have up to 10,000 Mah on board. Unless i'm reading the rule book wrong. Thought most people running the castle and neu motors were using a 2p set up. I use 2p on a spec motor and the top end speed isn't too significantly different. It does affect the turning and now that i think about it acceleration.

      Comment

      • D. Newland
        Fast Electric Addict!
        • Dec 2007
        • 1030

        #18
        You can, but OPC has very limited space. Most run 5K mAh (or under) packs in tunnels.

        Comment

        Working...