Twin ep1's

[Outboardz]

I'm new to this, what radio, receiver, ESC's, batteries and such do I need to set up twin ep1 outboards? Any help would be appreatiated.
Thanks

[Make-a-Wake]

If you are running brushed 550's a Traxxas EVX2 marine ESC should handle them. Those motors are only rated for 6-8 cells(nimh) so keep that in mind. You can also run 2s lipo.

[Outboardz]

If you are running brushed 550's a Traxxas EVX2 marine ESC should handle them. Those motors are only rated for 6-8 cells(nimh) so keep that in mind. You can also run 2s lipo.

Thanks for the input. Will I need one esc for each motor? And on OSE, the nimh batteries are out of stock, what lipos should use?

[Make-a-Wake]

You only need one ESC, it is wired for two motors. The EVX esc's come with a set of batt connectors for series connection. You only want 2s lipo..........you need to close the non-bec connector and use the other.

Good batt here since your motors will only draw around 15-20 amps:

http://www.hobbyking.com/hobbyking/s...dProduct=16785

[Outboardz]

You only need one ESC, it is wired for two motors. The EVX esc's come with a set of batt connectors for series connection. You only want 2s lipo..........you need to close the non-bec connector and use the other.

Good batt here since your motors will only draw around 15-20 amps

http://www.hobbyking.com/hobbyking/s...dProduct=16785

Thanks again, and what radio/receiver should I use? I would prefer a non-pistol grip. Like the square kind (I don't know what they're called).

[Make-a-Wake]

There may be some inexpensive ones on the hobbyking site........i bet there are.

[Outboardz]

There may be some inexpensive ones on the hobbyking site........i bet there are.

I found a few how many channels does it have to be? And will certain radios/receivers not work with the esc and stuff?

[Make-a-Wake]

Get a 2.4ghz and you only need two channels. The only one i see that is 2 channel is a pistol, maybe you can get this and just use 2 of the 4 channels

http://www.hobbyking.com/hobbyking/s...idProduct=8338

[Outboardz]

Get a 2.4ghz and you only need two channels. The only one i see that is 2 channel is a pistol, maybe you can get this and just use 2 of the 4 channels

http://www.hobbyking.com/hobbyking/s...idProduct=8338

Wow thanks I think that's every thing I need to get running. When I install them, I may a few more questions
Thanks.

[Outboardz]

Get a 2.4ghz and you only need two channels. The only one i see that is 2 channel is a pistol, maybe you can get this and just use 2 of the 4 channels

http://www.hobbyking.com/hobbyking/s...idProduct=8338

Oh, one more thing, what charger will work with those betteries?

[Outboardz]

And if someone could please please tell me what steering servo and linkage rods andnsuch I need! Thats the last thing I need I think. If you could put a link to the right things that would be very much appreciated.
Thanks