Which FE can Race Vs a 1/8 miss Bud?

[679alex]

hi :)
One of my friend got a 1/8 miss budweiser (stock) and i wanna race Vs him,
Which FE woul be atleast able to folow the miss bud (Zenoah 26cc Gaz)?

Only to know
Thanks.

[Rumdog]

Pretty much any RTR brushless boat will hang, depending on water conditions. Get a Aquacraft Motley Crew and you'll beat him up pretty bad with a prop upgrade.

[Doby]

UL-1,,,and he will be trying to keep up with you.

[679alex]

1/12 miss Elam plus Running on LiPo can do the job ?

Thanks for all the answer :P

[Boaterguy]

I thought the ul-1 was 1/16, he might want something bigger, a 1/16 will die in chop a 1/8 can handle, especially with the extra weight of a gas motor.

[679alex]

My 1/12 (stock) Miss Elam Whit Li-Po and a beter prop maybe an Octura... Can handle the 1/8 Miss Bud whit a Zenoah 26cc in it ?
I never tryed my Elam yet.
Thanks and sorry for my english =3

[Boaterguy]

with upgrades yes, I do not know the stock setup.
wth an octura (metal) you would have to balance and sharpen it, do you have the tools and skills necessary to do that?

[Make-a-Wake]

I'll race him with my 1/8 Hydro...................

[679alex]

i can try to do it there are a tutorial on aquacraft web site in grim reaper area or somewhere else

[679alex]

There: http://www.aquacraftmodels.com/acces...op-tuning.html

[Boaterguy]

http://www.modelpowerboat.com/content.php?138-propeller-balancing

that is a good tutorial on balncing, I reccomend reading two or three tutorials so you know if one person is just making it up.
http://www.offshoreelectrics.com/pro...prod=ose-80310
I am yet to own this balancer, but I have seen multiple good reviews and never a bad one.

[679alex]

Thx

[siberianhusky]

It's easy to sharpen and balance props but please read about the health hazards associated with beryllium, this is not a material you want to inhale any of!
Never use a power tool on a prop unless you have a method of controlling the dust.
I do all my prop work with files and sandpaper with either oil or water to control the dust.
Use a good respirator with a particulate filter, don't need carbon.
As long as you follow a few basic safety rules there is minimal hazard.
Remember once the dust has spread through your house everybody in the house gets to inhale it not just you!

[RandyatBBY]

I'll race him with my 1/8 Hydro...................

Aw shucks I would too I was clocked at 80MPH at the last SAW. Eat him for breakfast!

[679alex]

Aw shucks I would too I was clocked at 80MPH at the last SAW. Eat him for breakfast!

its only twice of his speed ... haha :P