Finishing up an HK-Genesis

[lightning67]

Hello All,
I just received my HK-Genesis and am looking for recommendations for the remaining parts needed.
Lipo configuration
Radio/receiver
Servo

It comes with a nylon prop, so I'm interested in what stainless prop to go with.
I'm looking for speed and decent run-time.
The ESC is 125A.

Thanks in advance.

[iamandrew]

Well mine runs pretty nicely with 2 x 4 S turnigy 4000mah Lipos in parallel, with a T180 ESC and a leopard 4074 2200Kv, also have two octua props, a x642 I think, and a x640x3 blade one.
I get almost 10minutes of run time id say but not full speed the whole time

[stadiumyamaha]

I just got one the other day. The motor is not a quality one. I ran it with a 180 seaking and a x442 prop with the stock motor. The result was 48.5mph run on 2 2s but a temp of almost 200deg. Next run the motor was done.
The set up i was running is with the strut level with the sponsons