Anti Spark brigde

[nosreme722]

I know theres been many threads on anti spark but i just have a quick question.

Can I just solder a resistor right in-between two bullets? No wire? i.e. bullet soldered to resistor soldered to second bullet.. to make a bridge to charge up the caps.

Just wondering Thanks

[bwells]

Interesting thought. I assume once the caps are charged, you would connect the bullets. It seems the problem maybe not being able to separate the battery from the ESC if that is where you were thinking of placing the resistor. If placed in the series harness between the 2 batts they could be charged in series but not real sure if the caps would charge slow. I'll be watching for the answer.

[nosreme722]

2011-06-23_18-09-06_446.jpgAlright well since no one answered i figured id just go ahead and try it. I actually found a 68ohm resistor and some alligator clips so i used those. Simple as it gets. There was still a small spark after charging the caps buts thats expected.