Tweet
I have a chance of getting an Mrp hydro, I have a brushless system laying around is it worth trying to put in, I don't have a the boat in hand but was thinking of upgrading flex shaft an hardware which I have an could make work. I would pull the two motor mount up and put a single in, or maybe put a traxxas system in if I could find it cheap
-
-
If you can get it cheap enough. Not sure if they get brittle over time or not. They are pretty old for sure"Our society strives to avoid any possibility of offending anyone except God.
Billy Graham -
$30Comment
-
sounds like a lot of fun since you have a bunch of gear for it I would do it"Our society strives to avoid any possibility of offending anyone except God.
Billy GrahamComment
-
Nice lookin! If that's the 24 incher and you want to keep the whole thing cheap you could throw this in it.............these motors are the best bang for the buck in a 540 size motor in my opinion.......vented endbells too.
http://www.hobbyking.com/hobbyking/s...idProduct=6527
ESC - http://www.hobbyking.com/hobbyking/s...idProduct=8946
throw a 3s batt in it and go!!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
plan on using a proboat system with seven cell packsComment
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
Comment