williams twin 1717 floor mount

[millzee]

I finally received my mount and 1717 jackets today, the mount wont fit between rails (that I didn't want) so they'll be removed to make room for this baby, I'm very pleased with this mount, maybe I've been spending too much time in the shed, this thing is sexy!! Well done jim.

[Fast One]

That looks way to cool!!!
What are you puting all that power into? I think that mount would be great for a twin rigger!

[millzee]

thats going into a Aeromarine sprintcat 80/90 with t180's on 6s2p, should be fun

[scoota]

Love the mount , nice & neat , good stuff millzee you should start a thread in the build section mate ?

[millzee]

I'll finish off the mean machine first, then I start a thread on the big pussy.

[Boaterguy]

you might want to run two seperate cooling systems, or a small ziploc container of ice to cool the water between motors.

[millzee]

I've been having a bit of a play around with the cat now that I've removed the rails and I have a couple of questions.
*What's the performance difference between having 1 rudder mounted in the center (just behind)of the prop's or if I was to run the props as close as I can and use a 2 rudder system, one on each side of the prop's?
*With the speedmaster large struts, they didn't come with any type bushing, can some one either link me to a thread on how to set it up or fill me in? I'm still tossing up weather to run a 1/4" stuffing tube with 7/32" bushings or to run the 9/32" with teflon.
*With a cat, is it best to have a long drive shaft with less bend or a shorter shaft?
any advice or links would be appreciated.
Thanks
Danny