Which Deep V

[lonneyb]

I am looking at adding a Deep v to my boat collection and was wondering what the options were...I really like the look of the King of Shaves P1...but have found nothing else beside the Spartan ...and it looks to be plastic...Any ideas?


Thanx in advance

[dana]

build your own. buy an aeromarine hull. heres mine

[Rumdog]

Pursuit mono from Kintec Racing

[dana]

Pursuit mono from Kintec Racing

a fine point

[Turbo Dan-O]

Stay away from the Spartan! They are plastic, and will smoke ESCs/motors at the drop of a hat! Seen it myself more than once.

Dan-O

[fatboyelectric]

There's quite a few great mono hull choices out there, the spartan isnt one of them. Check out the electric mono hull from Rico Racing, Delta Force, Titan 29 and 33 inch by Aeromarine Laminates, Insane boats 34 inch, Lizard and Lizard extreme by MHZUSA, No Step by Hydro & Marine to name a few. These are all traditional mono hulls without steps. The King of Shaves mono that you mentioned is a stepped hull I believe. If you like stepped hulls then check out Hydro&Marine.de and MHZUSA.com

[Make-a-Wake]

For an 'almost ready to run' boat the Pursuit is hard to beat. They are also sold with a Leopard 4074 installed with a T180a.

You could also "build your own" with a Delta Force Hull, 29, 33, or 35 possibly and throw a Leopard 40 size motor in it. You will find all kinds of nice speedmaster hardware here on OSE as well.

[jkr]

For an 'almost ready to run' boat the Pursuit is hard to beat. They are also sold with a Leopard 4074 installed with a T180a.

You could also "build your own" with a Delta Force Hull, 29, 33, or 35 possibly and throw a Leopard 40 size motor in it. You will find all kinds of nice speedmaster hardware here on OSE as well.

Pursuit Pursuit Pursuit.
The best of many out there.
I had 3 other hulls but like pursuit....

[lonneyb]

build your own. buy an aeromarine hull. heres mine

Thats is BEAUTIFUL!!!...Finedesign has one already Built i REALLY like!!
Its the TITAN any opinions about these guys build quality and also the Green Delta force grabbed my attention

http://www.finedesignrc.com/deals.asp

[lonneyb]

For an 'almost ready to run' boat the Pursuit is hard to beat. They are also sold with a Leopard 4074 installed with a T180a.

You could also "build your own" with a Delta Force Hull, 29, 33, or 35 possibly and throw a Leopard 40 size motor in it. You will find all kinds of nice speedmaster hardware here on OSE as well.

Pursuit Pursuit Pursuit.
The best of many out there.
I had 3 other hulls but like pursuit....

I REALLY like this hull as well!!!..Nice lines...

[lonneyb]

Looks like the Pursuit is the winner ...I really like that hull and from the videos i watched it performs!!!

[lonneyb]

Just sent off an email to Kintec for the Boat and the Venom Bag ...Just waiting back to hear the total with shipping to Canada!...

[electric]

lonneyb. Not to rain on the parade. Number one I haved owned a Pursuit and it is a great boat and it turns on a dime. The only thing you should be aware of, and it is a minor thing in the big scheme of things, is that the finish on it is is kinda "dull" and the yellow color is not that great(opinion). This is all very subjective and it is still a very good boat for the money.

Just thought you should know that though.

[lonneyb]

lonneyb. Not to rain on the parade. Number one I haved owned a Pursuit and it is a great boat and it turns on a dime. The only thing you should be aware of, and it is a minor thing in the big scheme of things, is that the finish on it is is kinda "dull" and the yellow color is not that great(opinion). This is all very subjective and it is still a very good boat for the money.

Just thought you should know that though.

Yip thats good info!!...I planned on getting the White one then Airbrushing my own Graphics over that then Clearing the whole thing.....Once i get this one i will be able to see how a Boat SHOULD be put together then i can go onto building my own ...but this boat seems to have the performance parts and adjustability i want and the looks..... so ill give a quick disassembly..... Airbrush her up ...and assemble again ...Easily done no?

[dana]

great choice. that thing will rip. thats a big powerful motor compared to your stiletto and geico if those are still stock.