Esc questions

[Fordfool302]

I have brushless blackjack 26 and I would like to change out my stock esc for a marine castle creations esc. Does anyone have any recomendations for which one to use or no how many amps the stock motor will handle.

Thanks for your input,

Chris

[RandyatBBY]

I have brushless blackjack 26 and I would like to change out my stock esc for a marine castle creations esc. Does anyone have any recomendations for which one to use or no how many amps the stock motor will handle.

Thanks for your input,

Chris

If you are running the Black Jack motor it will run on the 120 Hydra. I run my Black Jack motor on a Barracuda 80 and a cap board in one of my monos on 4S 1P.

[Fordfool302]

Esc talk

Do make any hardware for this boat I am looking to change everthing to aluminum verses the crappy stock plastic?

Thanks,

Chris

[Fordfool302]

hydra120 vs hydra240

Does anyone know the difference between these two and if they can be run in a bj26
Chris

[RandyatBBY]

Steve has hardware and so do I. The Hydra 240 is twice the controller that the 120Hydra is. But I never run over 4S on them.

[Fordfool302]

So it for two motors having two sets of motor leads it looks like from the picture?

Thanks,
Chris

[Fordfool302]

Also how much on the hardware and do you have any picture?

Thanks,

Chris

[RandyatBBY]

So it for two motors having two sets of motor leads it looks like from the picture?

Thanks,
Chris

Sorry no it is still for one motor and twice the amp draw.

Hear is some of my Cat hwd. I need to add a picture of some of the new stuff I am doing.

http://www.dmwb.org/forum/viewtopic.php?t=108&sid=fd68fd2aecf5545f52f080afa7443108

[Fordfool302]

Hardware looks good how much would I be looking at and do you do paypal, and one more question on the escs and I will leave you alone about them, if I got a hydra 240 for the bjk 26 I guess I couldnt run the stock motor so what motor would be the best to run, I am trying to get the most out of it as I can so appriciate your help and patients with me.

Thanks,

Chris

[RandyatBBY]

Hardware looks good how much would I be looking at and do you do paypal, and one more question on the escs and I will leave you alone about them, if I got a hydra 240 for the bjk 26 I guess I couldnt run the stock motor so what motor would be the best to run, I am trying to get the most out of it as I can so appriciate your help and patients with me.

Thanks,

Chris

My hardware starts at $80.00 and depending on the up grades to $150.00

You would not need that much controller, over kill. The 120 will be good and if you can find a Barracuda 80 it would be good enough.

I had to respond to you your handle ford fool 302 I have had a lot of fords I still own a 1970 sports roof and a 1974 off road Bronco look at my albums.

[Fordfool302]

Yeah man love my fords. I will be looking to purchase some hardware soon was gonna go with fullers but I may just get some through you.

Thanks,

Chris