2S Lipo setups??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • siberianhusky
    Fast Electric Addict!
    • Dec 2009
    • 2187

    #16
    Yep lbp is 4 pole, if you look at the part numbers the more expensive tacon motors will be listed as lbp as well they are 4 pole tacons.

    check out the toppower motors, the data sheet is exactly the same as the leopards listed below same specs exactly with a different logo. Listed as TBP motors.
    Confused enough yet about leopard/tacon/toppower?
    If my boats upside down then who owns the one I thought I was driving the last two laps?

    Comment

    • Boaterguy
      Fast Electric Addict!
      • Apr 2011
      • 1760

      #17
      I have an Ebay 4800kv motor, kinda like the watercooled one on hobbyking (blue with blue jacket), I do not know if it or the esc broke, I replaced both, you can have it for the shipping if you want it.
      The water jacket needs some "motivation" to get off the motor, it is sealed on with silicone and it should be watertight.

      Comment

      • RandyatBBY
        Fast Electric Addict!
        • Sep 2007
        • 3915

        #18
        Originally posted by Boaterguy
        I have an Ebay 4800kv motor, kinda like the watercooled one on hobbyking (blue with blue jacket), I do not know if it or the esc broke, I replaced both, you can have it for the shipping if you want it.
        The water jacket needs some "motivation" to get off the motor, it is sealed on with silicone and it should be watertight.
        Have you just not tested it with different ESC to motor, And visa versa? Nice offer, I do have a lot of old motors and do not want to take advantage of you. But if you are just going to discard I will take it.
        Randy
        For ABS, Fiberglass, Carbon hulls and Stainless hardware
        BBY Racing

        Comment

        • Boaterguy
          Fast Electric Addict!
          • Apr 2011
          • 1760

          #19
          It's in the scrap bun, it might go on something, but I don't have an esc for it, and I don't want to blow my new one, you can have it.

          Comment

          • RandyatBBY
            Fast Electric Addict!
            • Sep 2007
            • 3915

            #20
            Originally posted by Boaterguy
            It's in the scrap bun, it might go on something, but I don't have an esc for it, and I don't want to blow my new one, you can have it.
            Cool. do you have Pay Pal to send the funds for shipping?
            Randy
            For ABS, Fiberglass, Carbon hulls and Stainless hardware
            BBY Racing

            Comment

            • Boaterguy
              Fast Electric Addict!
              • Apr 2011
              • 1760

              #21
              I go through my dad, I'll get it later tonight and Calc shipping.

              Comment

              • Boaterguy
                Fast Electric Addict!
                • Apr 2011
                • 1760

                #22
                Do you still want the motor? I need your address to calc the shipping.

                Comment

                • RandyatBBY
                  Fast Electric Addict!
                  • Sep 2007
                  • 3915

                  #23
                  Originally posted by Boaterguy
                  Do you still want the motor? I need your address to calc the shipping.
                  Sure we will give it a try the add is Randy Naylor/BBY Racing, 1090 Shary Circle Unit F, Concord CA. 94518
                  Randy
                  For ABS, Fiberglass, Carbon hulls and Stainless hardware
                  BBY Racing

                  Comment

                  • Boaterguy
                    Fast Electric Addict!
                    • Apr 2011
                    • 1760

                    #24
                    I went to UPS and it says 20$ for shipping, that can't be right, I'll go into the nearest post office and tell you after I ship it

                    Comment

                    • RandyatBBY
                      Fast Electric Addict!
                      • Sep 2007
                      • 3915

                      #25
                      Originally posted by Boaterguy
                      I went to UPS and it says 20$ for shipping, that can't be right, I'll go into the nearest post office and tell you after I ship it
                      Ya just use the smallest flat rate USPS box it is $5.95
                      Randy
                      For ABS, Fiberglass, Carbon hulls and Stainless hardware
                      BBY Racing

                      Comment

                      • Boaterguy
                        Fast Electric Addict!
                        • Apr 2011
                        • 1760

                        #26
                        Alright, I might get out tonight, if not, I'll try by thursday at the latest.

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915

                          #27
                          Originally posted by Boaterguy
                          Alright, I might get out tonight, if not, I'll try by thursday at the latest.
                          Sounds good thanks I can Pay Pal you the 6 Bucks any time. USPS will supply the box.

                          Thanks to Jay Turner I have this setup in my Mini Zephyer. It is a older Hacker B50 8S and a 2S lipo with the Mystery 200amp ESC and a Cap board I built. I cleared coated the ESC with Conformal Coating. I also water cooled the heat sink. Thanks Jay!


                          Uploaded with ImageShack.us
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                          Comment

                          • Boaterguy
                            Fast Electric Addict!
                            • Apr 2011
                            • 1760

                            #28
                            If you can wait to the end of the week, My 'rents are making a trip to the states to pick something up from the UPS store, she can send it then, I think I can afford a buck or two for shipping, and avoid border crossing.

                            Comment

                            • RandyatBBY
                              Fast Electric Addict!
                              • Sep 2007
                              • 3915

                              #29
                              Originally posted by Boaterguy
                              If you can wait to the end of the week, My 'rents are making a trip to the states to pick something up from the UPS store, she can send it then, I think I can afford a buck or two for shipping, and avoid border crossing.
                              Sounds like a plan, Thanks No rush it is just for fun with my friends.
                              Randy
                              For ABS, Fiberglass, Carbon hulls and Stainless hardware
                              BBY Racing

                              Comment

                              Working...