Genesis collet

[Shaun78]

i have the stock drivesetup with an upgraded collet. 2 set scews 5mm. What size collet do i but for a spare? stock 4mm flex cable size?

[6sHyper]

5mm-.150 http://www.offshoreelectrics.com/pro...oct-ocfhe5mm15

[Shaun78]

I thought stock cable is 130 size

[6sHyper]

4mm = 0.1574803149608

You should really be drilling out your strut to accept a 3/16" prop shaft and start running either a .150 flex or better yet .187.

[Shaun78]

im having no issues with my 4MM setup. Fightercat is coming out with a direct replacement kit with no drilling so im waiting til then. I i did drill strut then install 3/16 bushings and get a 3/16 flex cable? stock liner and stuffing tube will wotk?

[6sHyper]

yeah you just grab a 3/16 speedmaster stinger bushing and cut it down a bit, drill out your strut slightly install the bushing then get a .150 flex with 3/16 shaft and yes it works with the stock liner and stuffing tube. the parts to do that cost under 30 bucks, if you really wanted not to do any drilling you could buy a new 3/16 strut, but really just wasting money IMO, drilling it out is a cinche takes 5 seconds.