Y Harness For 2 Lipos?

[MSTHTD]

Just got an MG. ESC has two leads, lipos have four leads...

Can't slove this equation with two unknowns... am I supposed to have a Y harness to run dual lipos?

Don't knock me, I'm just getting back into the hobby after five years of Naval service.

[U1Racing]

are the batteries supposed to be in series or parallel, and what plugs are you running?? by the way, thank you for your service to the country!!!!

[MSTHTD]

are the batteries supposed to be in series or parallel, and what plugs are you running?? by the way, thank you for your service to the country!!!!

Thanks, I appreciate it! It's great to be back in the RC trend! Series w/ 5.5mm Bullets. Prolly just have to go to my LHS and solder up a Y harness.

[Jabbo]

No harnes needed plug black from one batt to black on esc, plug red from other batt to red on esc , lastly plug your remaining red and black wires from your 2 batt together it is now in series. Just learned this myself.

[Jabbo]

You are using 2 2s to make 4s?
Also thanks for your service.
Jeff

[sailr]

Yes, two 2S in series makes 4S

[HYDROJERRY]

Thank you for your service bro,,what size batts are you using,, i use two 2s 5000 in my Genesis and it seems to run forever!!

[U1Racing]

if you follow what jabbo said you don't need a y-harness just plug one plug from each battery into the opposite plug on the other battery then plug the 2 leftover ends into your esc.

[MSTHTD]

No harnes needed plug black from one batt to black on esc, plug red from other batt to red on esc , lastly plug your remaining red and black wires from your 2 batt together it is now in series. Just learned this myself.

Thanks Bro! That's what I figured but I was a little skepticle about joining both batts by their own wires. So I figured to be sae and ask on here!

[MSTHTD]

Thank you for your service bro,,what size batts are you using,, i use two 2s 5000 in my Genesis and it seems to run forever!!

For sure! I've been running the same as you, I also have a 5s 5000 setup. Can't wait to try out the m445, just ran the x642 today.

[HYDROJERRY]

Where did you get a 5s battery??? i need 2 for a build im doing but wont need the wright away still go along way to go on the build.. PS i no on the proboat miss elam the 642 pro is the best or so im told i havent tryed it on mine yet..

[MSTHTD]

I don't have a 5s battery----> My setup is 2s+3s

[lectriglide]

No harnes needed plug black from one batt to black on esc, plug red from other batt to red on esc , lastly plug your remaining red and black wires from your 2 batt together it is now in series. Just learned this myself.

I saved this from the referenced thread back when I converted to 5.5mm connectors. It's great but you have to really pay attention when you plug stuff up. If you don't, it will "snap you to" in a hurry.