new guy needs help

[GRIF]

hay guys, i have a traxxas blast with brushless setup in it. the thing im having a hard time is when it planes the nose starts to bobbing or bounce really bad the faster i go, but even at the slower speeds it wount stop bobbing,

any input would be a big help

thanks
grif

[JimClark]

Have you tried moving your batteries to different positions to change the CG?

[CHUD]

hay grif

Can you post a pic of the boat,have you tried to move the bat's up closer to the front of the boat ,

[Make-a-Wake]

As stated, usually moving the batts forward settles the nose down. Vid is always welcome!

[Alexgar]

Also try adjusting the prop down

[CHUD]

Have you tried moving your batteries to different positions to change the CG?

HAHAHA good one jim at the sametime

[GRIF]

Thanks guys but I have moved the bat up front and even tryed adding led wheel weight a little at a time to see if it would help. i will try to get a vid up some time this week maybe if u guys see it moving it will help u guys to tell me whats wrong

thanks
Grif

[rc2266]

got trim tabs? Usually helps

[sundog]

got trim tabs? Usually helps

[rc2266]

Did anything help?

[GRIF]

Well no luck so far, last thing to try would be trim tabs. Any one know where I can get some little trim tabs or some pics of some home made ones I can try to copy
Thanks
Grif

[785boats]

I just use some 1/16" aluminium angle for my home made ones.