looking for a hull to put ul-1 power plant, whatcha got?

[dana]

im looking for something to build and i dunno whats good for 4s ul-1 motor/esc. im all over the place from doing a rigger, tunnel, or my fav a titan 29. anyways im looking for some suggestions or possibly getting something used in great shape. lemme know, thanks

[Diesel6401]

A ul-1

DF26 or copy
DF29 or copy
DF Vortex or copy
VS-1
JAE21
H&M No Step 1 or 2. I had both with ul1 power in it. Fast as hell! Have video of the No Step 1 in my signture.

[TheShaughnessy]

i have a sv, but i'm guessing you want something a little bigger and stable. In pretty good condition.

[lipdaddy]

This would be great.


http://www.offshoreelectrics.com/pro...d=df-vortex-24

Ryan

[Alexgar]

Disagree with the df 29 but the 26 would be great on the 29 by the time you 2P it it think it is just a little to much but that's just my opinion no disrespect to deisel

[Gunny]

I put mine in this....

[properchopper]

im looking for something to build and i dunno whats good for 4s ul-1 motor/esc. im all over the place from doing a rigger, tunnel, or my fav a titan 29. anyways im looking for some suggestions or possibly getting something used in great shape. lemme know, thanks

Titan 29 / UL-1 motor ( not currently for sale, too dear to me but there's some out there)

http:www.youtube.com/watch?v=uRZ4PAF9GY4

Of course if you want max speed & spend $$ for a new one

http://www.youtube.com/watch?v=93Qw7lQnxdQ

[Diesel6401]

Disagree with the df 29 but the 26 would be great on the 29 by the time you 2P it it think it is just a little to much but that's just my opinion no disrespect to deisel

All good... different opinons are valued

- Guys run those in spec classes and you wouldn't have to 2p a ul1 motor.

[Alexgar]

I run 2p on a cc1515 and it's a bit on the heavy side maybe I'll buy a ul1 motor to try in the ul1 I just bought but was thing of putting a 1512 I had hanging in my box

[Diesel6401]

I run 2p on a cc1515 and it's a bit on the heavy side maybe I'll buy a ul1 motor to try in the ul1 I just bought but was thing of putting a 1512 I had hanging in my box

Yea I would 2p a CC1515, I 2p my leopard 4074 2200kv.... but it wouldn't be neccesary 2p a ul1 motor IMO...

[properchopper]

Yea I would 2p a CC1515, I 2p my leopard 4074 2200kv.... but it wouldn't be neccesary 2p a ul1 motor IMO...

I run 4S2P 3300's or 4000's in the Titan for Spec LSO; 4 min + full mill lap race

[dana]

thanks guys... i think im really into a deep vee hull. im not trying to break any speed records here, just looking for something that doesnt flip over like my old sv did. here in MA we get alot of windy days and choppy water, so the df's just arent deep enough to cut thru.

[Jabbo]

If you could find a proboat fastec nice deep v I run mine on that set up its a lot of fun fast and stable ( still tape down your canopy) lands on it's feet most of the time.

[dana]

If you could find a proboat fastec nice deep v I run mine on that set up its a lot of fun fast and stable ( still tape down your canopy) lands on it's feet most of the time.

this is true, those are supposed to be very stable. i hate proboat tho lol. but still a good consideration, too bad theyre the same price as the titan new

[Diesel6401]

I run 4S2P 3300's or 4000's in the Titan for Spec LSO; 4 min + full mill lap race

That sounds like a nice long race Tony, I am sure you do need a 2p setup for that. Extra little bit a weight may help a little also I assume? I just was trying to say for sport boating a 2p setup isn't a neccessary thing on that motor. Just my thoughts on that.