38" Seaducer and Castle 1717

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • obrien
    Fast Electric Addict!
    • Nov 2007
    • 1264

    #1

    38" Seaducer and Castle 1717

    I am in the process of building one of these hulls for q-offshore and was wondering what kind of amps you guys think this setup would pull. I am thinking about trying the seaking 180 just because it is cheap, but I am not sure if it will be enough to handle this combination. Otherwise I will be running one of the castle 240 esc's.
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    I run a 1717 with a T180 in a 39" DF knockoff mono on 6s..................works fine for me. Got it to 59.9mph with an x450 over the winter months.............then the water temp rose this spring and it thermaled twice........so i went to an x447 and it runs great. Still get 55 out of it.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • obrien
      Fast Electric Addict!
      • Nov 2007
      • 1264

      #3
      I quess my biggest concern is going to be a run time of 4 mins running it hard since it will be a race.

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #4
        Oh, i'm running 6s2p with 10,000 mah.
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        Working...