pulso 100amp ?

[steveo]

has anyone used this speed control i would like to hear some feed back

[ReddyWatts]

Steven only sold a few of these for testing. Have not heard any feedback.

[Steven Vaccaro]

I had about 5 of each size give or take. I had one returned. He ran a 6xl on a 70amp pulso esc and poof. Not the esc's fault. I had another 40 amp esc returned. He said it wouldnt run his boat. I got it back and tested it at 20-35 amps on a airplane esc for 5 minutes. Ran great. That one will be going in a scratch and dent someday.

I have more coming in. Not pulso, but the same manufacturer. You have to understand the asian market. There are a bazillion dealers that call themselves manufacturers, but only a few actual manufacturers.

[JimClark]

Is this a source where you will be able to consistently get reasonable quantities whenever you want? Are they sealed and water cooled? I want a 70 to try in the 1/16th scale boats
Jim

I had about 5 of each size give or take. I had one returned. He ran a 6xl on a 70amp pulso esc and poof. Not the esc's fault. I had another 40 amp esc returned. He said it wouldnt run his boat. I got it back and tested it at 20-35 amps on a airplane esc for 5 minutes. Ran great. That one will be going in a scratch and dent someday.

I have more coming in. Not pulso, but the same manufacturer. You have to understand the asian market. There are a bazillion dealers that call themselves manufacturers, but only a few actual manufacturers.

[Steven Vaccaro]

I hope so. Buying from China is a gamble. When I buy them, I'm taking the gamble acting as the middle man. I test the batch and make sure they are ok, prior to me shipping them.

[JimClark]

I hope it works out as there ase getting fewer choices for people running smaller boats. Hacker isn't making the navy's anymore and castle isn't making the 80 anymore. Might just have to start using airplane esc's

Jim

[txboatpilot]

But Castle will have the new HV water cooled esc'c soon!!

http://www.castlecreations.com/products/hydra_hv_line.html

[JimClark]

Ya if you want to pay $279 list for a 60 amp ESC. I have no intention on paying that kind of money for a small boat like a 1/16th scale.

Jim

[yz120]

i run mine pulso 100amp w/11xl on 16 ib3600`s with no problems,not even very hot just over 100deg.

[JimClark]

What the Pulso 100?

i run mine w/11xl on 16 ib3600`s with no problems,not even very hot just over 100deg.

[txboatpilot]

JimClark Ya if you want to pay $279 list for a 60 amp ESC. I have no intention on paying that kind of money for a small boat like a 1/16th scale.

Sorry I missed that Jim, that is WAY to much $$!! Would a SV27 esc work?

[JimClark]

No I looked at them and they will not go down to 2s Lipo